Tag Archives: Hyperpool Shale Shaker
The Features of the Hyperpool Shaker
The Hyperpool shaker is a high-end mud vibration screen launched by Derrick Company. The Hiperpool shale shaker is specifically designed for onshore oilfield drilling operations. The Hiperpool shale shaker is a solids control equipment introduced by TR Solids Control to replace the Hyperpool shaker.
The main features of the Hyperpool Shale Shaker are as follows:
Hyperpool shaker is suitable for various drilling scenarios.
- The Hyperpool shaker serves as the main shale shaker, undertaking the primary screening task of drilling fluids.
- The Hiperpool shale shaker can be used as mud cleaner to further purify drilling mud.
- As secondary drying device for drill cuttings, it reduces the residual fluid in drill cuttings, improving resource utilization and environmental friendliness, and meeting the core requirements of various onshore oilfield drilling operations.
High processing capacity
- Compared with the Derrick FLC 503 shale shaker, in the same area, the processing capacity of Hyperpool shaker is increased by up to 35%. The Hiperpool shale shaker meets the processing requirements of higher flow rates of drilling fluids, can reduce the number of required shale shakers, and lower equipment investment costs.
- The Hyperpool shale shaker adopts fluid centering technology. The Hyperpool shaker uses an inverted sieve bed design to concentrate the fluid at the center of the sieve bed, maximizing the screening effect and fluid throughput.
- The Hyperpool shale shaker relies on proprietary sieve mesh compression technology and nitrile rubber mattress to achieve a perfect seal between the sieve mesh and the sieve bed. The Hyperpool shale shaker completely eliminates the leakage of solid particles from below the sieve mesh, increasing the solid removal rate by 24%, while reducing the cost of drilling fluid dilution and waste treatment.
Easy operation and efficient, significantly reducing labor costs.
- The sieve replacement of the Hyperpool shale shaker is quick. The Hiperpool shaker adopts a single-side sieve mesh compression system, allowing for operation on the left or right side. The replacement time for a single sieve panel of the Hyperpool shaker is less than 45 seconds, and the entire sieve replacement can be completed in 3 minutes. Compared with traditional equipment, it significantly shortens downtime and improves operational continuity.
- The sieve design of the Hiperpool shaker is user-friendly: the sieve panel weighs only 8 kilograms (18 pounds), lightweight and easy to move, reducing the labor intensity and injury risk of operators, and eliminating the need for hammers, crowbars, etc., making the operation safer.
- The running angle of the Hyperpool shaker can be adjusted. It is equipped with an adjustable (AWD) sieve bed angle function in the drilling process, with the sieve bed angle ranging from +3° to +8°. Operators can flexibly adjust the sieve bed angle within the range of +3° to +8° without interrupting the equipment operation, optimizing the screening performance and adapting to different processing requirements of drilling fluids.
Hyperpool Shale Shaker Introduction
The Hyperpool Shale Shaker is a high-performance drilling mud shale shaker launched by the American Derrick Equipment Company. Hiperpool shale shaker is mainly used in onshore oil and gas drilling operations to separate drilling fluid from rock debris. Hyperpool Shale Shaker can be flexibly configured as single-stage shale shaker, mud cleaner, or secondary rock debris drying device.
The core technology and performance of the Hyperpool Shale Shaker:
Hyperpool Shale Shaker Vibration System: Standardly equipped with two Super G® vibration motors, capable of generating over 8G excitation force; bearings are lubricated for life and require no maintenance; Super G comes with a 2-year warranty, and Super G2 comes with a 3-year warranty; noise is as low as 74±4 dBA.
Shaker Screen and Replacement: Utilizes Pyramid screen mesh technology, increasing the API effective screen area compared to traditional screening machines by up to 45%; single-sided compression system, replacing a single screen plate takes less than 45 seconds, and replacing the entire machine takes less than 3 minutes; the fluid alignment technology of the concave screen bed increases processing capacity by 35% and prevents solid short circuits.
Configuration and Environmental Protection: Four screen plate structure, optional steam extraction (VE) cover; no hardware sealing pads, preventing leakage; adjustable single-point screen surface inclination, suitable for different working conditions.
Application scenarios of hyperpool shale shaker：
1.Primary mud purification for onshore oil and gas drilling.
2.Combined with a mud cleaner (with a cyclone).
3.Secondary drying treatment of cuttings to reduce waste liquid discharge.
If you need hyperpool shale shaker, you can purchase the entire machine and spare parts (such as screens, shock absorbers, and motors) through authorized agents. Additionally, third-party manufacturers also provide compatible API standard screen replacement parts.
If you need more information about the Hyperpool Shale Shaker, I can help you prepare a performance comparison chart between the Hyperpool
Shale Shaker and similar Shale shakers (such as FLC503).
