Tag Archives: shale shaker manual

Separation Process Of Mud Shale Shaker

During the drilling process, the solid-liquid separation process begins when the drilling fluid flows on the shale shaker screen surface after passing through the circulatory system to carry the cuttings back to the wellhead, then through the elevated tank, the buffer tank and the shunting plate till onto the shale shaker.

mud shale shaker|mud shaker|drilling shale shaker

mud shale shaker|mud shaker|drilling shale shaker

Solid-liquid separation is a process, it is impossible to immediately separate all the drilling fluid when the mud fluid just flow to the shaker screen. When a small part of the mud fluid passes through the shaker screen, most of the mud liquid immediately spread out along the shaker screen, forming a layer of mud. Mud layer becomes thinner and thinner with the separation process going on, until at last reaches one certain position,generally called liquid phase termination line. In this process, large solid particles are repeatedly thrown, small particles and liquid passing through the screen into the mud tank to start the next cleaning stage,such as desander and desilter.Over the termination line solid particles continue to move forward until being discharged. The liquid phase termination line is normally located in the 2/3 to 3/4 effective length of the shaker screen when the shale shaker works normally.

mud shaker for sale|shale shaker drilling

mud shaker for sale|shale shaker drilling

TR is a professional manufacturer of mud shale shaker and drilling fluid solid control equipment,widely applied in oilfield drilling,mineral mining,HDD and trenchless system,etc.TR Solid Control is also an exporter of mud shale shaker and drilling fluid shale shaker.Welcome to TR Solid Control to consult and guide the mud shale shaker and other solid control equipment.

Contact Us:TR Solids Control

Sales office:No.10 West of North 2nd Ring Road Xi’an City.

Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.

Tel:+86-29-86332919

Call:13186019379

E-mail:sales@trsolidscontrol.com

Web:www.chinasolidscontrol.com

Mud Shale Shaker Sent to Mongolia Drilling Site

In the moment the wind of China’s environmental protection blowing more and more strong, oil drilling industry is no exception.As the drilling mud contains the chemical material, so the mud waste can not be directly discharged. The mud pitless system can meet the environmental requirements.TR series of shale shaker is used as the slurry drying shaker for the initial separation ofdrilling cuttings.

mud shale shaker|drilling shale shaker|shale shaker for sale

mud shale shaker|drilling shale shaker|shale shaker for sale

TR series of mud shale shaker with large exciting force and effective drilling cuttings separation.TR shale shaker is suitable for the pitless system to separate the drilling mud with large amount of sand.TR shale shaker has delivered to Inner Mongolia drilling site pitless system.
The vibrating force of TR shale shaker can be adjusted spontaneously so that the mud shale shaker can adapt to various drilling sites.

shale shaker manual|shale shaker manufacturer

Mud shale shaker is also the most important primary separating equipment in the drilling site, so choosing a professional manufacturer when you need a mud shale shaker is very important. TR is a specialized manufacturer of mud shale shaker and mud pitless systems.
TR series of mud shale shaker is divided into linear motion shale shaker ,balanced  elliptical motion shale shaker and variable frequency shale shaker. Variable frequency  shale shaker can adjust the exciting force quickly and easily on site without stopping the mud shale shaker.

Contact Us:TR Solids Control

Sales office:No.10 West of North 2nd Ring Road Xi’an City.

Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.

Tel:+86-29-86332919

Call:13186019379

E-mail:sales@trsolidscontrol.com

Web:www.chinasolidscontrol.com